[Home ] [Archive]    
:: Main :: About :: Current Issue :: Archive :: Search :: Submit :: Contact ::
:: Volume 1, Issue 1 (4-2019) ::
3 2019, 1(1): 26-30 Back to browse issues page
Investigating and comparing the effect of process optimization and use of a grinding aid in improving the performance of cement mill department in a cement plant
Behnam Nasrollahzadeh *, Reza Elyasi
Department of Chemical Engineering, Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad, Iran
Abstract:   (356 Views)
Producing cement with appropriate quality and by spending the minimum cost, applying solutions including process optimization and use of grinding aid are suggested. This paper compares and investigates the effect of process optimization and use of grinding aid on the operational capacity and blaine of final product in two cement mill departments in a cement plant. The results of a specific grinding aid test and its effect on the quantity and quality of the final product were compared with the results obtained from process optimization of cement mill lines 1 and 2 of a cement plant including optimization of the arrangement and tonnage of the charge of balls. The results suggested that the operational capacity of cement mill of lines 1 and 2 when optimizing the process conditions increased by around 9.4 and 15%, and the blaine of the final product of the department rose by about 4.6 and 4.3% respectively compared to the case of using the grinding aid. It should be noted that performing the grinding aid test in relation to the initial conditions only resulted in enhanced operational capacity of cement mills, and had no significant effect on the parameter of quality (blaine). On the other hand, performing the process optimization had positive effects on both quantity and quality.
Keywords: Cement mill, Process optimization, Grinding aid, Operational capacity, Blaine, Specific electric energy consumption
Full-Text [PDF 426 kb]   (207 Downloads)    
Type of Study: Applicable | Subject: Fluid Mechanics
Received: 2018/11/25 | Accepted: 2019/03/22 | Published: 2019/04/14
Send email to the article author

Add your comments about this article
Your username or Email:

CAPTCHA


XML     Print


Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Nasrollahzadeh B, Elyasi R. Investigating and comparing the effect of process optimization and use of a grinding aid in improving the performance of cement mill department in a cement plant. 3. 2019; 1 (1) :26-30
URL: http://journals.hsu.ac.ir/asfm/article-1-36-en.html


Volume 1, Issue 1 (4-2019) Back to browse issues page
پیشرفت ها در مکانیک جامدات و سیالات Advances in Solid and Fluid Mechanics.
Persian site map - English site map - Created in 0.12 seconds with 32 queries by YEKTAWEB 3920